Grizzly G0513P Bedienungsanleitung PDF herunterladen (Seite 52)

-50-

G0513 Series Bandsaws

Crosscutting

Crosscutting is the process of cutting across the

grain of wood. For plywood and other processed

wood, crosscutting simply means cutting across

the width of the material.

To make a 90˚ crosscut:

1. Mark the workpiece on the edge where you

want to begin the cut.

2. Adjust the blade guide assembly to no more

than 1" above the workpiece and the miter

gauge to 90°.

3. Move the fence out of the way. Place the

workpiece evenly against the miter gauge.

4. Hold the workpiece against the miter gauge

and line up the mark with the blade.

5. After all safety precautions have been met,

turn the bandsaw ON. Slowly feed the

workpiece into the blade and continue the

cut until the blade is all the way through the

workpiece. Figure 73 shows a typical cross-

cutting operation.

Figure 73. Example of crosscutting.

Resawing (see Figure 74 for an example) is the

process of cutting a board into two or more thinner

boards. The maximum board width that can be

resawn is limited by the maximum cutting height

of the bandsaw.

Blade selection is one of the most important con-

siderations when resawing. Generally, the wider

blade, the better. In most applications, a hook or

a skip tooth style blade with fewer teeth-per-inch

(from 2 to 4) is desirable because they offer larger

gullet capacities for clearing sawdust, decrease

blade heat, and reduce strain on the motor.

Resawing

When resawing thin pieces, a wandering

blade (blade lead) can tear through the sur-

face of the workpiece, exposing your hands

to the blade teeth. Always use push blocks

when resawing and keep your hands clear

of the blade.

Figure 74. Example of resawing.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 107 108

Kommentare zu diesen Handbüchern

Keine Kommentare

Grizzly G0513P Bedienungsanleitung Seite 52

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motorsägen Grizzly G0513P