Grizzly G0702 Bedienungsanleitung

MODEL G070212" DISC SANDER w/BRAKEOWNER'S MANUAL(For models manufactured since 1/12)COPYRIGHT © SEPTEMBER, 2009 BY GRIZZLY INDUSTRIAL, INC.,

-8-Model G0702 (Mfg. since 1/12)SECTION 2: POWER SUPPLYAvailabilityBefore installing the machine, consider the avail-ability and proximity of the requ

Model G0702 (Mfg. since 1/12)-9-Extension CordsWe do not recommend using an extension cord with this machine. If you must use an extension

-10-Model G0702 (Mfg. since 1/12)Wear safety glasses dur-ing the entire setup pro-cess!This machine presents serious injury hazards to untrained users

Model G0702 (Mfg. since 1/12)-11-The unpainted surfaces of your machine are coated with a heavy-duty rust preventative that prevents corro

-12-Model G0702 (Mfg. since 1/12)MountingWe strongly recommend that you mount your sander to a workbench to prevent it from moving during operat

Model G0702 (Mfg. since 1/12)-13-4. Connect the machine to the power source.5. Verify that the machine is operating correctly by turning the machine

-14-Model G0702 (Mfg. since 1/12)SECTION 4: OPERATIONSDamage to your eyes and lungs could result from using this machine without proper pro-tective ge

Model G0702 (Mfg. since 1/12)-15-The Model G0702 sander accepts 12" diameter adhesive-backed sanding discs. These are avail-able in a varie

-16-Model G0702 (Mfg. since 1/12)The most efficient way to get a perfect miter is to cut the workpiece slightly long and sand it to the desired dimen

Model G0702 (Mfg. since 1/12)-17-SECTION 5: ACCESSORIESPRO-STICK® Abrasive Surface CleanersExtend the life of your sanding discs and sleeves! Choose

This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, r

-18-Model G0702 (Mfg. since 1/12)SECTION 6: MAINTENANCEAlways disconnect power to the machine before performing maintenance. Failure to do this may re

Model G0702 (Mfg. since 1/12)-19 -Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-ops. If y

-20-Model G0702 (Mfg. since 1/12)TroubleshootingWorkpiece FinishSymptom Possible Cause Possible SolutionMiter bar loose or binds in miter slot.1. Mite

Model G0702 (Mfg. since 1/12)-21-At 90˚ the miter gauge should be perpendicular to the face of the wheel when it is mounted in the table slo

-22-Model G0702 (Mfg. since 1/12) Note: This can be done with the sandpaper installed, although it is somewhat more pre-cise if the sandpaper is not

Model G0702 (Mfg. since 1/12)-23-READ ELECTRICAL SAFETY ON PAGE 23!These pages are current at the time of printing. However, in the spirit of improvem

-24-Model G0702 (Mfg. since 1/12)READ ELECTRICAL SAFETY ON PAGE 23!Wiring DiagramView this page in color at www.grizzly.com.PADDLE SWITCH(viewed from

Model G0702 (Mfg. since 1/12)-25- 15 23 14618 21 2161717 3V2192910434542441214111374394031418611 3-1 3V2-2 3V2-3 3-4 3-5 3V2-6 3V2-7 3V2-851617Main B

-26-Model G0702 (Mfg. since 1/12)Label Parts ListREF PART # DESCRIPTION REF PART # DESCRIPTION100 PLABEL-12C READ MANUAL LABEL 103 P0702103 COMBO WARN

CUT ALONG DOTTED LINEName _____________________________________________________________________________ Street ______________________________________

Model G0702 (Mfg. since 1/12)-1-Table of ContentsINTRODUCTION ...

TAPE ALONG EDGES--PLEASE DO NOT STAPLEFOLD ALONG DOTTED LINEFOLD ALONG DOTTED LINEGRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069Place

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty doe

-2-Model G0702 (Mfg. since 1/12)INTRODUCTIONThe Model G0702 Disc Sander features a 1 HP, 120V, 1720 RPM motor equipped with a motor brake and

Model G0702 (Mfg. since 1/12)-3-Machine Data SheetThe information contained herein is deemed accurate as of 12/11/2011 and represents our most recent

-4-Model G0702 (Mfg. since 1/12)Figure 1. Model G0702 Disc Sander.IdentificationA. MotorB. Cast Iron Disc (Sanding Disc Attached)C. Disc GuardD. E

Model G0702 (Mfg. since 1/12)-5-ELECTRICAL EQUIPMENT INJURY RISKS. You can be shocked, burned, or killed by touching live electrical components or

-6-Model G0702 (Mfg. since 1/12)WEARING PROPER APPAREL. Do not wearclothing, apparel or jewelry that can becomeentangled in moving par

Model G0702 (Mfg. since 1/12)-7-Additional Safety for Disc SandersPOSITION TABLE CORRECTLY. Make sure the gap between the table and sanding d